Also, see above “Why is my Power Pack no longer charging?”. If this is the first time the pack is being connected to the furniture, confirm it’s being connected to the correct furniture connection. Once a green light begins to blink, the pack has been reset and demo mode will be turned off.Ģ0- My pack shows 4 green lights, why won’t it power my furniture? To clear demo mode, disconnect pack from furniture, and connect to the charger. If the LED light indicator is pressed and held for 3-5 seconds the pack will enter demo mode. The LED light indicator button does not need to be pressed after recharging. If a pack was just recharged, and the red light flashes with the buzzer sounding, more than likely the pack has been put in demo mode. The pack has entered interactive low power level and will need to be recharged. Contact us for assistance with properly recycling the Power Pack. This is a safety feature preventing a severely depleted pack from recharging. The pack will no longer recharge once in this state. The pack has been severely discharged below the hard shutdown level and the pack has entered terminal shutdown. The red light and beeping will turn off during recharging when the power is restored above the interactive low power alert level. Depending on the pack model, the flashing red light may also be accompanied by an audible beep. The pack was depleted below the interactive low power alert level. If Power Pack needs to be recharged on a weekly basis, please contact us here.ġ4- Why is a red LED light flashing on my Power Pack? Wireless remote controllers require constant power and will drain a Power Pack very quickly even when furniture is not being used.
These features will drain a power pack very quickly even when furniture is not being used. Wands and handheld controllers typically require constant power. This can severely decrease the overall life of the Power Pack. Charging devices will cause accelerated power consumption and rapidly increases cell deterioration. Use of USB ports or wireless charging ports to charge any device will DRAMATICALLY REDUCE the motorized function count. USB ports or wireless charging ports EVEN IF NEVER USED, can have a constant draw. The Second: your furniture has constant drawing features. May also be used for longer time between recharging recliners, or loveseats/sofas (4 or less features).Į10- Designed for use on furniture with constant drawing features including but not limited to USB ports, wireless charging ports, wands, handheld controllers, wireless remote controllers etc. May also be used for sectionals powering individual seats with up to 6 features total (will require use of “e” and or “y” cables). May also be used for recliners with adjustable footrest, lumbar and headrest (up to 3 features).Į6- Designed for loveseats/sofas with adjustable footrest, lumbar and headrest (up to 6 features). (Individual features such as footrest, lumbar, and headrest each count as one).Į2- Designed for recliners with just an adjustable footrest or with both adjustable footrest and headrests (1 or 2 features).Į4- Designed for loveseats/sofas with just adjustable footrests, or with both adjustable footrests and headrests (up to 2 or 4 features).
The first: your furniture is being under powered.Īs a rule of thumb, the Power Pack # should be greater than or equal to the # of features the furniture offers. There can be many reasons a pack might need to be recharged more frequently than expected. 12- Why does my Power Pack need to be recharged so frequently?
0 kommentar(er)
